-Closed loop feeding system to prevent moisture from coming into contact with external air after the raw materials have dried;
-Equipped with a standard hot air recovery device, it saves energy, eliminates the emission of hot air and dust, and protects the environment;
-Standard equipped with a cut-off type suction box to ensure that there are no missing raw materials in the tube;
-Thermal insulation material cylinder, bottom blowing design, ensures no heat loss and improves drying efficiency;
-A heatless regeneration device can provide low dew point drying air to accelerate the processing speed of raw materials.
| Model | XM-25 | XM-50 | XM-75 | XM-100 | XM-150 | |
| Hopper capacity | kg | 25 | 50 | 75 | 100 | 150 |
| Airflow | m3/hr kw | 200 | 270 | 300 | 319 | 390 |
| Heater power | kw | 3.5 | 4 | 6 | 6 | 9 |
| Drying blower | w | 135 | 170 | 185 | 200 | 320 |
| Feeding blower | kw | 0.75 | 0.75 | 0.75-1.1 | 1.1 | 1.1-1.5 |
| Air compressor power | kw | 1.1 | 1.5 | 2.2 | 3.7 | 4 |
| Compressed air flow | L/min | 120 | 190 | 260 | 310 | 405 |
| Dew point | -32℃～-40℃ | -32℃～-41℃ | -32℃～-42℃ | -32℃～-43℃ | -32℃～-44℃ | |
| Feeding pipe | inch | 1.5 | 1.5 | 1.5 | 1.5 | 2 |
| Dimensions | L*W*H mm | 952*710 *1410 | 990*710 *1530 | 1090*740 *2120 | 1285*920 *2180 | 1285*920 *2380 |
